Logotipo Texsa, S.A.

EMUFAL RENOVE

EMUFAL P is a rubber-modified bituminous emulsion, high viscosity and cold-applied. Once dried, it forms a high quality, continuous and elastic film. Ideal to achieve great adherence between bitumen membranes and rugous concrete supports.

Technical documentation

  • Logo Facebook
  • Logo Twitter
  • Logo Linkedin
  • Advantages
  • Application
  • Installation
  • Storage
  • Regulations
• Adherence even on slightly wet surfaces
• Primer for the adherence to the mineral slate finishing
membranes in re-waterproofing of refurbishing roofs
• Great resistance to high temperatures
• Forms an elastic film which maintains its flexibility
even at -10ºC
• Durable coating with high covering power
• Easy to apply
• Solvent-free.
· Priming of smooth or coarse concrete supports.
· Especially to ensure polymeric bitumen membrane adhesion on car parks.
· Priming to adhere other membranes to mineral memranes. (Restoration)
· Level supports without the need to use hot oxyasphalt.
Application method:
1. Clean the support with a KÄRCHER pressure washer.
2. Apply the first layer of EMUFAL P
- It can be applied on dry or slightly wet surfaces, but not with dripping water. It is applied cold, with a brush, rubber roller or airless equipment
- Application temperature must always be higher than 5ºC.

Support:
· The surface where it will be applied must be completely free of dust, loose or poorly adhered materials, oily or non-stick residue and any soil in general.
· It can be applied on dry or slightly damp surfaces. In hot weather or in the presence of some release agents, it is recommended to slightly dampen the surface first.

Quantity required:
Depends on the coarseness of the support. In general, the minimum recommended coverage is 0.5 to 1.5 kg/m², depending on the kind of application.
Drum 23 Kg
Pallet 506 Kg
Complies with the UNE 104-231 (EA Type Emulsions) standard). For application as a primer and for preparation of surfaces.

Related Products

 

DATA PROTECTION

 

In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.

TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.

In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.

 

TEXSA SYSTEMS SLU.
C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
Castellbisbal
08755, Barcelona - Spain
NIF B66067687

Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80

Email:  lopd@texsa.com